克魯勃BE 41-1501高負荷重型低速潤滑脂

詳細內容：產品基本信息： 型號：lub BE 41-1501 英文名稱:Kluberlub BE 41-1501 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：1KG/580 25KG/13200 180KG/98800 類型：無鉛重型低速潤滑脂滾動軸承承受高負荷 寶貝描述： Klüberlub BE 41-1501無鉛重型低速潤滑脂滾動軸承承受高負荷。 說明:這種重型油脂下設高粘度礦物烴油（ISO VG1500），特殊特別是有效和鋰皂基EP / AW添加劑。它也包含（二硫化鉬固體潤滑劑和石墨），以確保可靠的操作潤滑下餓死條件。Klüberlub BE41-1501耐針對老齡化和保護可靠腐蝕。 應用：Klüberlub BE41-1501 尤其是開發了大型低速滾動軸承承受高負荷。它通常適用于潤滑滾子軸承（調心滾子軸承）在輥壓機，碗工廠和基地回轉式破碎機材料產業。對經營條件滾子軸承，即- 低轉速，N=10-30轉- 高負荷，P/ C =0:25至0:50- 軸承溫度約。50 - 70° C- 沖擊和震動負載需要用重型潤滑脂高粘度基礎油和優良的抗磨性能，如像Klüberlub油脂BE41-1501。這種油脂也是合適的潤滑軸承和旋轉滑動軸承。 包裝規格：1千克罐25千克桶180公斤桶 英文： Klüberlub BE 41-1501 Lead-free heavy-duty grease for low-speed rolling bearings subject to high loads Description This heavy-duty grease consists of a highly viscous mineral hydrocarbon oil (ISO VG 1500), special lithium soap and particularly effective EP/AW additives. It also contains solid lubricants (MoS2 and graphite) to ensure reliable operation under starved lubrication conditions. Klüberlub BE 41-1501 is resistant to ageing and protects reliably against corrosion. Application Klüberlub BE 41-1501 was especially developed for large low-speed rolling bearings subject to high loads. It is typically applied to lubricate the bearings of rollers (spherical roller bearings) in roller presses, bowl mill and rotary crushers in the base material industry. The operating conditions of the roller bearings, i.e. – low speed, n = 10-30 rpm – high load, P/C = 0.25 – 0.50 – bearing temperature approx. 50 – 70 °C – shock and vibration loads require a heavy-duty grease with a high base oil viscosity and excellent antiwear properties, such as a grease like Klüberlub BE 41-1501. This grease is also suitable for the lubrication of pivoting bearings and plain bearings. Application notes The ambient temperature should be ≥15 °C when Klüberlub BE 41-1501 is applied with an automatic greasing pump. Storage The storage period is approx. 2 years if the product is stored in the original closed container in a dry place. Pack sizes 25 kg bucket 180 kg barrel Klüberlub BE 41-1501 ● heavy-duty grease ● high base oil viscosity (ISO VG 1500) ● excellent wear protection ● contains solid lubricant for emergency operation ● free from lead and chlorine Behaviour towards elastomers and plastics Generally, plastics and elastomers that are resistant to mineral hydrocarbon oils also offer adequate resistance to Klüberlub BE 41-1501. For safety reasons, however, we recommend conducting a resistance test prior to series application. Compatibility with elastomers 100 °C; 168 h 72 NBR 902 Change in volume % < 10 Change in hardness Shore A, approx. -5 Antiwear behaviour 500 h test on the FAG-FE-8 rolling bearing test rig 1 test run 2 angular contact ball bearings 7312 TP, Fa = 80 kN, P/C = 0.54, n = 7.5 rpm Steady-state temperature, °C Friction moment, Nm Rolling element wear (V50), mg 2 test runs 4 tapered roller bearings 31312 A, Fa = 50 kN, P/C = 0.24, n = 75 rpm Steady-state temperature, °C Friction moment, Nm Rolling element wear (V50), mg 36.4 * 19.7 * 2 ** 46 * 15.5 * 18 ** * Average values ** Requirement of FAG/Schweinfurt for a "heavy-duty grease": ≤ 35 mg Summary of FAG test results (excerpt): "From the test results it can be concluded that Klüberlub BE 41-1501 meets the requirements for FAG grease category LG12. This means that it is suitable for application in low-speed rolling bearings subject to very high loads and shocks (in case of point and linear contacts) used, for example, in roller presses and bowl mill crushers."