克魯勃UNIMOLY HTC METALLIC高溫潤滑脂

詳細內容：產品基本信息： 型號：UNIMOLY HTC METALLIC 英文名稱:Kluber UNIMOLY HTC METALLIC 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：0.75KG/1000 類型：高溫潤滑脂 寶貝描述： UNIMOLY HTC METALLIC金屬高溫潤滑脂 說明：UNIMOLY HTC METALLIC 是金屬高溫潤滑脂，含有石墨和金屬。它的化學成分礦物油，鋰皂和扎實的潤滑劑的混合物。它的工作溫度范圍在 - 25 °C和1200 °C。以上為150°C的溫度基礎油蒸發，留下了干式潤滑膜。粘貼不包含鉛，鎳，硫，鹵素及鋇。 應用：UNIMOLY HTC METALLIC適合作為高溫粘貼螺絲，螺母和螺栓。由此產生的干膜潤滑劑可以使拆開這些機械元件沒有任何問題。在壓鑄行業這是用于潤滑的頂針，核心組件和螺紋連接。在塑料加工工業UNIMOLY HTC METALLIC使用作為一個加熱擠出機潤滑油頭和螺桿式噴嘴。此外，UNIMOLY HTC METALLIC證明有效的程序集粘貼擠壓成型的并以此為彈簧墊圈潤滑油組件。 包裝規格：0.75公斤 德語： UNIMOLY HTC METALLIC High-temperature paste containing graphite and metal Description: UNIMOLY HTC METALLIC is a high-temperature lubricating and assembly paste containing graphite and metal. It has a chemical composition of mineral oil, lithium soap and a solid lubricant mixture. Its service temperature range is between – 25 °C and 1200 °C. Above a temperature of 150 °C the base oil evaporates and leaves a dry lubricating film. The paste contains no lead, nickel, sulphur, barium and halogens. Application: UNIMOLY HTC METALLIC is suitable as a high-temperature paste for screws, nuts and bolts. The resulting dry lubricant film makes it possible to disassemble these machine elements without any problems. In the pressure die casting industry this paste is used for the lubrication of ejector pins, core pullers and threaded connections. In the plastic processing industry UNIMOLY HTC METALLIC is used as a lubricant for heated extruder heads and screw-on nozzles. In addition, UNIMOLY HTC METALLIC has proven effective as an assembly paste for extrusion moulding dies and as a lubricant for spring washer components. Application notes: NOTE: Always apply UNIMOLY HTC METALLIC in a thin layer! Clean the friction point with a solvent and remove all residues and separating layers, such as corrosion protecion agents, to ensure optimum adhesion ofUNIMOLY HTC METALLIC, then apply the paste evenly across the entire surface. In the case of machine screws make sure that the paste is also applied to the underside of the screw head. Only if the thread and the lower surface of the screw head are coated with the lubricant will it be possible to obtain an optimum preload force during tightening and to disassemble the parts even when they were subject to high temperatures. For easier application use UNIMOLY HTC METALLIC Spray, the sprayable version of the paste. In the case of pressed connections it is important to apply only a very thin layer to the metal surfaces. When joining the connection excess paste will be forced out of the connection and might result in functional defects of adjacent components if there is a possibility that the excess lubricant slings off. Minimum shelf life: The minimum shelf life is approx. 36 months if the product is stored in the original closed container in a dry place. Package size: 0.7 kg can UNIMOLY HTC METALLIC Controls preloading Ensures easy disassembly even after the influence of high temperatures High pressure absorption capacity Prevents stick slip Meets the requirements set forth by automobile manufacturers (e.g. FORD Tox. No. 103.548, Peugeot/Talbot T 845.200.372)