克魯勃B-F 1 ULTRA開式齒輪油

詳細內容：產品基本信息： 型號：fluid B-F1 ULTRA 英文名稱:Kluberfluid B - F1ULTRA 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：25KG/4880 180KG/33800 類型：開式齒輪潤滑脂 寶貝描述： 中文：說明Klüberfluid B - F1ULTRA是runningin潤滑劑，特別是開發循環或飛濺潤滑。它有一個礦物基礎油和含有硬脂酸鋁作為肥皂增稠劑。其他添加劑和特種石墨除了確保控制運行中的新牙合寧側面或損壞平滑齒面，完好側翼的保護，同時時間。為減少磨損的影響經營時間的增加。Klüberfluid B -1 F ULTRA是一個非牛頓流體從瀝青自由，溶劑，重金屬和氯。按照與AGMA251.02Klüberfluid B -1 F ULTRA歸類之間的“特殊化合物”（第3.4）。該規格表6，“極壓齒輪潤滑劑“得到充分滿足。 應用：Klüberfluid B -1 F ULTRA采用的是在飛濺，槳輪或流通用于開式齒輪的潤滑磨合潤滑或側面校正的目的。該應用的可能性是限制既不是組件的大小也沒有能力驅動器。外設速度應不超過8.5米/秒。搜索驅動器主要安裝在旋轉窯中，管磨機，并機使用在水泥，石灰，石膏，采礦和化工行業。 KlüberfluidB F- 1 ULTRA不適合軸承的潤滑（滾動或滑動軸承）。 包裝尺寸25千克桶可移動的蓋子180公斤桶 英文：Klüberfluid B-F 1 ULTRA Running-in lubricant for open drives Description Klüberfluid B-F1 ULTRA is a runningin lubricant especially developed for splash or circulation lubrication. It has a mineral base oil and contains aluminum stearate as a soap thickener. Other additives and the addition of special graphite ensure controlled running-in of new tooth flanks or smoothening of damaged tooth flanks, with the undamaged flanks being protected at the same time. The wear effect decreases as the operating time increases. Klüberfluid B-F 1 ULTRA is a non- Newtonian fluid free from bitumen, solvents, heavy metals and chlorine. In accordance with AGMA 251.02 Klüberfluid B-F 1 ULTRA is classified among the "Special Compounds" (para 3,4). The specifications of Table 6, "Extreme Pressure Gear Lubricants" are fully met. Application Klüberfluid B-F 1 ULTRA is used in the splash, paddle wheel or circulation lubrication of open gears for running-in lubrication or for flank correction purposes. The application possibilities are restricted neither by the component’s size nor the capacity of the drives. The peripheral speed should not be more than 8.5 m/s. Such drives are mainly installed in rotary kilns, tube mills, and machines used in the cement, lime, gypsum, mining and chemical industries. Klüberfluid B-F 1 ULTRA is not suitable for the lubrication of bearings (rolling or sliding bearings). Application notes For splash lubrication Klüberfluid B-F 1 ULTRA is filled into the oil bath and is thus transferred directly to the tooth flanks. With the Klübermatic PA circulation lubrication system, the lubricant is directly sprayed onto the tooth flanks. Storage 24 months at room temperature. Protect the package from direct sunlight. Pack size 25 kg bucket 180 kg drum with removable cover Running-in lubricant for open drives Klüberfluid B-F 1 ULTRA ● Running-in and correction lubricant for open drives with splash or circulation lubrication ● Free from heavy metals, solvents, bitumen and chlorine ● Easy application ● Controlled wear for flank correction Colour Texture Density at 20 °C, DIN 51 757, g/cm3 Worked penetration in acc. with Klein at 25 °C Base oil viscosity, DIN 51 561, approx . 20 °C, mm2/s 40 °C, mm2/s 100 °C, mm2/s VI base oil, DIN ISO 2909 VKA welding force, DIN 51 350, Pt 4 FZG A/2.76/50 °C, DIN 51 354 Evaporation loss after 100 h at 100 °C Application by splash lubrication, °C Application by circulation lubrication, °C Efficient lubricant film, °C Thermal load limit for lubricating film, °C Product data black homogenous, fluid approx. 1.01 500 · 0.1 mm ± 30 7000 1300 60 approx. 96 ≥ 7500 Scuffing load stage > 12 work-related loss in weight approx. 1.0 mg/kWh < 1 % by weight 0 to 100 10 to 80 to ≈ - 30 to 200