廣州龍門舉升機 供應龍門舉升機 供應沈陽龍門舉升機

詳細內容：GHL32CA/40CA 整體柱式龍門舉升機 ASYMMETRIC COLUMN CLEAR FLOOR LIFT 特點/Features: 1.龍門式設計讓操作者在車下工作更輕松； 2.采用動力單元配置節流裝置，可隨時調整下降速度； 3.手動雙邊解鎖； 4.標配24V限位開關； 5.支臂采用非對稱式設計，車門開得更大； 6.橡膠支撐墊采用螺旋式調整高度及分階段式調整高度二中，隨機選用； 7.標配車門防護膠塊，保護車門免受損傷； 8.標配安全護欄，保護腳趾； 9.經過115%動態和150%靜態測試； 10.CE認證。 1. Clear floor design makes easy working under beneath the cehicle. 2. By two cylinder,plate and wire rope chain balance system lifting off and landing smooth . 3. Hydraulic power unit configuration throttling device, can always adjust the rate of deline. 4. Manual lock release from two sides. 5. With 24V limit switch. Asymmetric column allows wider drive through clearance. 6.Rubber support pad with spiral adjust the height and in stages adjust the height, optional. 7. Rubber pad door-opening protection. 8. Toe protection. 9. Trucks adapter can optional. Have adopted 115% dynamic and 150% static loading tested. 10. CE approved 技術參數/Technical specification： 舉升重量/Lifting capacity……………………………………………3200kg/4000kg 舉升高度/Lifting height………………………………………………1900mm 最低高度/Minimum height…………………………………………90mm 舉升時間/Lifting time………………………………………………….40-50s/50s 總高/Overall height……………………………………………………..3726mm 總寬/Overall width………………………………………………………3420mm 柱間寬/Width between columns…………………………………2820mm 電機功率/Motor Power……………………………………………….2.2kw 電源要求/Power supply………………………………………………220V /240V/380V/415V 重量/Weight……………………………………………………………….655kg/690kg 包裝尺寸/Packing size…………………………………………………3750*530*770mm